Hikvision IP Camera Setup (Mac)


  • administrators

    Hikvision DS-2CD2032-I (HD 1080p PoE IP Camera)

    1. Prepare, you will need:

    • router (cable modem, or other similar device) with at least one free LAN port (Internet)
    • Hikvision DS-2CD2032-I IP Camera
    • PoE Injector or PoE Switch or PoE Router (to power the camera)
    • Two RJ45 Cat5e Ethernet Cables Step

    2. Connect:

      1. connect the first RJ45 cable to your Internet connection (ex. Router LAN port)
    • 1.1 connect the other end to the PoE injector (or PoE Switch). If your router has a PoE LAN port, you can skip this step
      1. connect the second RJ45 cable to the PoE injector output (Power+Data OUT)
    • 2.1 connect the other end to the Hikvision DS-2CD2032-I IP Camera Step

    3. Access Setup:

      1. fire up BonjourBrowser and find the IP and Port of the camera
      1. create port forwarding on your router for the IP and Port
      1. access the address with a web browser and change the IP address and Port after your preference, the default admin pass is admin/12345 Step
    • 3.1 if Step 3. does not work:
        1. download software from Hikvision
        1. access camera and set your IP and Port (default admin pass is admin/12345)
        1. create port forwarding

Log in to reply
 

Looks like your connection to H7 was lost, please wait while we try to reconnect.