3. HUACAM IP Camera Setup (Mac)

HUACAM IP Camera Setup (Mac)

  • Y
    administrators

    HUACAM HCV712 (HD 720p PoE IP Camera)

    1. Prepare, you will need:

    • router (cable modem, or other similar device) with at least one free LAN port (Internet)
    • HUACAM HCV712 IP Camera
    • PoE Injector or PoE Switch or PoE Router (to power the camera)
    • Two RJ45 Cat5e Ethernet Cables Step

    2. Connect:

      1. connect the first RJ45 cable to your Internet connection (ex. Router LAN port)
    • 1.1 connect the other end to the PoE injector (or PoE Switch). If your router has a PoE LAN port, you can skip this step
      1. connect the second RJ45 cable to the PoE injector output (Power+Data OUT)
    • 2.1 connect the other end to the HUACAM HCV712 IP Camera Step

    3. Access Setup:

      1. Open Terminal and type in: arp -na
      1. try to locate the IP address and when found, access it via any web browser. Ex. 10.0.1.4
      1. Click on Configuration (user and pass is admin/admin)
    0
Log in to reply